Internal mixed glass beads

Chinese T24722-21009 NO2 1

China national standard glass beads are made of high quality glass beads made of selected glass and processed by special technology.
The use of China's national standard glass beads has greatly improved the road traffic safety factor, which plays a vital role in road safety. Using the principle of glass bead refraction, the light beam of the car in the night is reflected back to its sight, which forms the effect of the marking line. These beads not only enhance the visibility of the road marking at night, but also increase the service life of the marking line on the whole.

The following are the parameters of inner mixed glass beads (GB/T GB 2):


Sieve diameter(micron)
number(visual number)
Passing rate (%) (on the sieve)
Remarks
>600 >30 0
Premixed glass beads for hot melt,
two component,
waterborne pavement
marking coatings

Roundabout rate:≥80%







600-300 30-50 50-90
300-150 50-100

5-50

<150 <100 0-5


KS Standard Glass Beads,Appearance: colorless transparent sphere, round and smooth, no obvious bubbles or impurities.1,micro glass beads for road marking paint as reflective material;  2,  glass beads for road marking paint; 3 glass beads for traffic.  4; round rate of â‰¥ 80%; Density :2.4-2 .6g/cm3; refractive index: Nd â‰¥ 1.50 .

REFLECTIVE GLASS BEADS – drop on / premix beads

For the visibility of road markings reflective glass beads are a major component. Together with the marking material the reflective glass beads constitute the retroreflecting system. The micro glass beads embedded in the marking material reflect the headlight of the car, hence the marking lights up at night. This [lighting up" – retroreflection – makes the road marking better visible for the driver and is thus an important and crucial factor for road safety.

Reflective glass beads as drop on or premix beads:

increase road safety through better visibility at night as well as in particularly bad weather conditions, like fog or rain. improve the life span and the durability of the road marking due to their hardness are a particularly economical factor for traffic guidance and road safety


blyglassbeads one of China reflective glass beads factory can offer a wide range of products and reflective glass beads with refractive indices ranging from ≥ 1.5 to 1.9. In addition it is guaranteed that impurities (e.g. iron) are minimized and/or heavy metal contents.

The production of all reflective glass beads confirms to national and international standards (BS6088, EN 1423, EN 1424, AASHTO, etc.).

Individual customer requests are possible with any type of reflective glass beads.

marking




KS Standard Glass Beads

KS Standard Glass Beads,KS Standard Micro Glass Beads,KS Standard Reflective Glass Bead,KS Standard Road Marking Glass Beads

YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , http://www.blyglassbeads.com