Everyone knows that the granulator often suffers from various wear and tear during the process of use . Sometimes it may cause some minor faults due to improper operation . Therefore, in order to effectively extend the service life of the equipment , we must work in the usual work. To operate in the right way :
　　 1. Adjustment of the gap between the ring die and the press roll For the adjustment of the gap between the new ring die and the press roll , the ring die and the highest point of the press roll should be slightly contacted , and the press roll can reach the state of " like turning and non-turning " . If yes be adjusted in the operating state, may be appropriate to increase the pressure of the pressure roller and the ring mold, but it must be enough is enough clearance ring mold and the pressure roller is excessively large, the pressure roller can not be rotated, causing plugging machine gap of the ring die and the press roll If it is too small , it will increase the wear of the ring die and the pressure roller, and the load will increase , which will seriously damage the ring die and the pressure roller . Check the gap between the ring die and the pressure roller in time, and check it at least every four working hours . when adjusting the respective pressure roller, to adjust the direction of each platen roller, should the pressure roller relative to the respective zero torque and granulator shaft so that the wood granulator asymmetric forces from impact.
　　 2 , the team maintenance granulator should do pre-work inspection every shift , check the transmission parts, instruments, valves , add lubricated oil using lithium-based lubricants , and remove iron filings on the iron .
　　 3 , the correct installation or replacement of the ring mold and the pressure roller is generally a new mold with a new roller , the old mold with the old roller , so that the surface shape of the ring mold and pressure roller is close to the contour state , the gap between the ring mold and the pressure roller The same is the same . This way the entire ring mold is very uniform in force and discharge , which can improve production efficiency .
Safety Workwear has a wide range of high-quality, is used in perfect for a wide range of working environments and job roles, such as warehouse duties, building sites or parcel deliveries. If you are working in cold environments, outdoors, or in dangerous situations, then you need to wear safety workwear to keep highly visible and protect yourselves when carry out the job. Such as Winter Jacket, Safety Coverall, Safety pants etc.
Our safety worwear is made in hi-vis fabric and reflective tape, meeting EN ISO20471 standards, has useful functions, for example, keeping warm, having a host of storage pockets. All of our workwear items can be easily personalised with print or embroidered any logo and are quality products at very competitive prices.
Safety Workwear
Safety Workwear,Work Vest,Warning Vest,Safety Clothing
Xinxiang Zhongke Reflective Material Co., Ltd. , http://www.safetyvest.pl