The installation location of different options to install the floor drain is also different, such as the shower room to choose a large flow of floor drain, bathroom, kitchen need to choose deodorant, pest floor drain, washing machine use washing machine dedicated floor drain and so on. Today we will take a look at how to install anti-odor floor drains and how to install deodorant drains . We hope to help everyone.
How to install anti-odor floor drain installation method
1. The installation height of four anti-cards through sealed odorless floor drain is ≥ 7cm (from the ground to the turning point of the drain pipe).
2. Please remove the sealing core before installation to avoid the impact of debris falling into the use effect.
3. If the drain pipe is too close to the ground, the drain pipe should be cut short enough so that the panel is slightly lower than the floor after the floor drain is installed (Note: Do not damage the floor waterproof layer).
4. If the drainage pipe is too far from the ground, it can be filled with cement mortar and raised the drainage pipe so that the floor drain can be inserted.
5. During operation, drain the drain pipe with a cloth to prevent it from falling into the debris; then use a piece of kraft paper or other strong material to roll into a cylinder that matches the drain pipe, and dock with the drain pipe and rise above the ground. , Fill the mixed cement mortar (1:1) into the surrounding voids. The fill height is slightly lower than the floor after the floor drain is installed.
6. After the cement mortar is solidified, place the floor drain in the pipe formed by it (Note: The cement mortar should not wrap or seal the sealing core. This will cause the sealing core to not be removed or the gasket cannot be opened).
7. Fill the gap between the floor drain panel and the ground with white cement and smooth it. Finally, put back the sealing core and cover it with a duster (Note: Use the floor drain after the cement is completely dry).
8. If it is a washing machine floor drain, insert the drain pipe sleeve into the upper pin of the sealing core (it can also eliminate surface water).
9, according to the use of the situation, generally about 20 days to clean up once, when the seal will be removed from the body on the counter-clockwise removal of the core body, wash hard in the water a few times.
How to install the deodorant floor drain and how to install the anti- odor floor drain are briefly introduced here. I hope to help you. For more information, please visit this website. Stay tuned.
Floor drain
Deep Drawing Parts,Deep Drawing Metal Stamping Cover,Custom Metal Deep Stamping,Deep Metal Stamping
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.tongdetrades.com