Different people do the same thing, the time used is different, which is caused by the different efficiency of each person. Similarly, the slurry pump also has its own efficiency, slurry pump work efficiency, work faster, it will save a lot of time. Here's how to improve the working efficiency of the slurry pump. First, the motor rotation direction adjustment. The direction of rotation of the motor should be consistent with the specified direction, not the reverse rotation, otherwise it will cause the slurry pump impeller tripping or damage to other components. Pump and motor should be completely disconnected, and then check the motor steering. Second, the addition of oil. Thin oil-lubricated bracket should be in the car before the oil in accordance with the oil line position to add "Instructions for use" as specified in the oil. Third, check and adjust the gap between the impeller and the front guard. The general gap should be 0.75-1.0mm. Fourth, the transmission adjustment. Using flexible pin coupling drive, should be good pins and protective cover. Belt drive, the belt should be good, adjust the tension, and a good protective cover. Fifth, clean up the tools and debris placed on the slurry pump unit to prevent accidents during pump operation.
Stainless Steel Stamping Parts
Stainless Steel Stamping Parts,Metal Stamping,Stainless Steel Frame,Custom Hot Stainless Steel
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.jstongdetrade.com