Floor heating is an indispensable heating device in the north, which makes people feel comfortable and warm during use. However, we know that no matter what product is used for a long time, there will be problems. Therefore, it is necessary to find out the cause in advance. This will be more convenient to solve. The following Xiao Bian will introduce to you the warm water inlet pipe hot water pipe how to do and the inlet pipe heat solution analysis.
How to do if the hot water inlet pipe is not hot in the floor heating pipe : Cause There is air in the pipe
For example, there is air in your geothermal pipeline. This will stop heat transfer and cause the return pipe to become hot. Solution: Then you must turn off the water return main valve, open the main water supply valve, then close all the branch valve, and then open the bypass valves one by one. This way you can use the pressure shock to release. Gas is enough.
How to do if the hot water inlet pipe is not hot in the floor heating pipe : Causes the floor heating filter to become blocked
It should be noted that in general, an ordinary floor heating filter is generally referred to as a Y-type filter, and its installation position is also at the water separator of the floor heating inlet pipe, if the position is not reasonable at the time of installation. When the local warm filter is blocked, only part of the water flow can pass through the floor heating filter, which also causes the inlet pipe to be hot and the outlet pipe to be not hot.
The solution is as follows: Step 1: At this time, you can only remove the Y filter valve and remove the filter. Step 2: Pull out the solid impurities in the filter. Rinse the filter with tap water. Then use the disused toothbrush. Brush it; Step 3: Check if the filter network port is still blocked. Make sure to flush it and reinstall it on the Y-shaped filter angle valve.
How to do if the floor heating pipe is not hot
The improper use of floor heating pipes can also lead to serious fouling of the interior of the pipe wall, which can also lead to heating of the floor heating pipe. Solution: At this time, it is possible to use the sewage in the floor heating pipeline. In general, this solves the plugging problem. But to eliminate the troubles, or proceed with the clean-up of scale, you can use the following methods to clean the scale, remove the air release valve, and then connect a pipe to the installation opening of the water separator air release valve, close the backwater main valve, and open The total inlet water valve closes the small valves of each branch branch, and then opens one by one to discharge sewage until the released water is fresh water.
Summary: Regarding the method of heating the hot water outlet pipe of the floor heating pipe and how the hot water inlet pipe is not hot. Solution analysis The relevant content is introduced to this, in fact, there are many reasons that will cause the floor heating pipe to be not hot, but when you are repairing it, It must be checked before it can be found in order to find a suitable solution.
BM-LS-××S series digital Load Cell(made of alloy steel) has simple bridge construction with two end fixed, center bearing load, and uses the steel ball. Its center can be automatically adjusted and returned to original position, so it has strong capacity of anti-tilting force. The load cell has the characteristics of high accuracy, easy installation and maintenance, reliable operation, etc. Its main capacities are 3t, 5t, 10t, 20t, 25t, 30t and 50t. It can be used for producing various special scales such as electrical Truck Scale, railway scale and Hopper Scale. The load cell has protection grade specified as IP68. It is used to be explosive dangerous circumstance, the explosion-proof symbol is Exia Ⅱ CT6Ga; ExiaD20T85.
Digital Load Cell,Digital Weighing Scale Load Cell,Digital Weighing Load Cell,Digital Weighing Load Cell
SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com