After the tile is finished, there will be a gap phenomenon, if you do not deal with it, this will affect the overall effect, and may damage the tiles, so when you find this problem, be sure to deal with it in time. The following Xiao Bian came to give you some information on how to deal with the cracks in bathroom tiles and how to deal with dirty tiles.
How to deal with bathroom tile gap
1, how to deal with the bathroom tile cracks , ready the United States and plastic guns, the United States compared to plastic glass joints, this will be more difficult to build up, mainly because the United States are thicker sizing agent, and usually need to mix two materials It takes a lot of effort to squeeze glue guns. Choosing a good glue gun is the most crucial thing.
2. It should be noted that each 50cm before and after the US grout can not be used, because they must be mixed to achieve your desired requirements.
3, during the construction process, we must remember that we must not use the kind of beautiful sewing paper, directly with the United States sewn the ball will be better.
4. If the original crevice has been filled with a sealant, it can be properly removed to a certain depth, but remember to not clean it too deeply, otherwise it will cause the phenomenon of deep depression.
What to do if the tile gap is dirty
1. Prepare a tile sealant. Be sure to select the color of the tile that is close to the color. Also, prepare a tool that is a silicone gun.
2. If you want to put the sealant into the silicone gun, press the upper end of the silicone gun first, then pull up the rod to the top, so that you can put the sealant into the silicone gun.
3. Before we fill the tiles, we must first clean the gaps in the tiles, try to sweep the dust with a brush, and the gap can not have the phenomenon of water.
4. Fill along the gap in the tile, and squeeze out the sealant while moving. In this way, you can fill the gap into a continuous straight line.
5. Put on your fingers and slide your finger along the extruded caulking agent. This is to make the gap full and smooth.
6. Wait a minute or so and you can use the blade to easily scrape the excess material away.
7. After 2 hours, the caulking agent will solidify, and generally it will harden after 24 hours. At this time, it will not affect the rubbing.
Summary: How to deal with bathroom tile cracks and how to deal with the gaps in the tiles. Related content is introduced to this, tile filling gaps are still a certain skill, you can follow the above steps, so that you can fill out a good looking tile gap.
CSA cement is considered as calcium sulphate aluminium cement. It shows the performance of high strength, rapid hardening or fast setting, corrosion resistance and carbonation resistance. It can be used in many fast setting applications such as non-shrink grout, self-leveling compound, fast setting tile adhesive or tile grout and fast setting repair system etc.
sulphate aluminium cement,calcium sulphate aluminium,fast-setting cement,rapid hardening mortar; fast setting repair
Shanghai Na Long Tech Co., Ltd , https://www.na-long.com