1. The personnel have been trained before the operation, and all the protective and safety devices of the equipment are in good condition and function;
2. The operator should wear appropriate work clothes, wear earmuffs and safety glasses if necessary;
3, according to the compressed air of 7-8bar, adjust the machine according to the size of the profile;
4. Apply super glue to the end face of the corner code and the inner cavity of the profile. After the corner code is pressed, wipe off the spilled glue;
5. Place the profile of the group corner on the workbench, adjust the V-shaped plate, and work after positioning;
6. Step on the left foot switch “lift the slide†to raise the slide to position the profile;
7. Step on the right foot switch “Pressureâ€, so that the pressurizing punch is pressurized by the pressurizing cylinder, so that the profiles are connected to each other, and the group angle is completed;
8. Loosen the right foot switch "pressurize", the working process is finished, and the pressure punch and the pressure cylinder are reset again;
9. Release the lock cylinder block and the slide seat in the middle of the left foot switch “lifting the slide seatâ€;
10. Check the pressed profile;
11. Do not use open flames during testing and maintenance.
12. The maintenance of the machine is carried out in accordance with the "equipment operation, maintenance and maintenance system".
Concerned about surprises
Label: How many do you know about the operation of the corner machine?
Previous: How much do you know about the structure and installation of tapered roller bearings? Next: The working principle of various fire sprinklers should be known
Rain Shower Head with Handheld Shower Faucet Set Complete with High Pressure.Includes one-piece cartridge to simplify installation and maintenance.Our shower system provides free replacement parts in 5 years.
Thermostatic Shower Faucet,Bath Shower Set,Shower Set Heads,Hand Shower Set
HESHAN CAIZUN SANITRAYWARE CO.,LTD , https://www.caizunsanitaryware.com