The charcoal machine is a machine in which raw materials such as bamboo sawdust, peanut shells, corn cobs, etc. are pulverized into a pellet of 10 mm by a wood chip crusher, dried by a dryer, and then placed in a carbonization furnace for carbonization.
Good products are inseparable from the usual maintenance and maintenance, in order to avoid unnecessary losses, and can also effectively extend the life of the equipment. The daily maintenance of the charcoal machine should be understood by the majority of users. First, the rod making machine should check the oil quantity of the cylinder before starting the machine. We all know that the wearing parts of the rod making machine are propellers, so it is necessary to repair and replace from time to time. It is the direction of the discharge port that is best for the wall. It should be noted that it is strictly forbidden to stand in front of the discharge. When feeding, it is necessary to ensure that there is no hard material in the raw material. Finally, the carbonization furnace should first check that the fan rotates without any problem, and the condenser has no water leakage; the joints of the components should be tight, the furnace door seal should be intact, and the wood tar pipeline should be smooth. Correct and safe operation equipment can ensure high-efficiency production, learn how to do the daily maintenance and maintenance of equipment, not only reduce the cost of production, but also maximize the benefits of customers.
The mechanism charcoal is a charcoal machine that uses agricultural and forestry residues (agricultural and forestry product waste) as raw materials, and is made of mechanically extruded, de-cigarized and charcoal. It has the advantages of long burning time, strong firepower, smokelessness, odorlessness, and no blooming phenomenon during combustion. According to the inspection of authoritative departments, the physical and chemical indicators of artificial carbon are superior to those of natural burning charcoal.
Charcoal mechanism bar requirements:
The raw material rod is completed in a molding machine (or a bar machine). The forming cylinder of the molding machine has a heating ring outside, which can raise the temperature of the forming cylinder to about 350. In order to ensure the density of the charcoal stick is large, the surface is smooth, and there is no obvious crack. We can choose the right molding temperature according to the type of raw materials and moisture content. Its level must be determined through field tests. Generally speaking, if we assume that the screw thruster is qualified and the water content of the raw material is between 6~12%, we can control the final temperature of the sawdust, wood sawdust, wood flower and bamboo raw materials to 260~ Between 320 ° C.
Zhongli charcoal machine complete equipment includes bar machine, dryer, carbonization furnace and other equipment. Zhengzhou Zhongli Machinery welcomes more friends to visit our company.
Charcoal machine price Cui manager charcoal machine manufacturers QQ More details on the charcoal machine equipment network http://
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Lens Ring,Lens Ring Joint Gasket ,Lens Gasket,Lens Ring Gasket
WENZHOU JINGWEI SEAL TECHNOLOGY CO., LTD , https://www.ringjoint-gasket.com