The cabinet is a kind of furniture fashion. It not only looks beautiful, but also can make full use of space. It is an ideal choice for modern living room. Want to have a set of desirable cabinets, in addition to the choice of quality assurance cabinet brand, there are four points to note:
Brand shop: Miki Li cabinet Libo cabinet
First, the measurement of the cabinet. The cabinet of the cabinet can be either a wall or a mezzanine, which not only ensures the efficient use of space, but also does not deform. But be sure to do the top and bottom level, both sides of the vertical, if there is an error, the required height difference between the left and right sides of the hole is less than 5mm, the bottom wall of the closet door can be adjusted through the debugging system to make up for errors.
Second, the installation of the track. When the cabinet is made, it needs to reserve the dimensions for the rails. The reserved dimensions for the upper and lower rails are 8cm for folding doors and 10cm for sliding doors.
Third, the installation of the shelf. Home cabinets generally have a drawer design, in order not to affect the use, when designing the position of the drawer, pay attention to: when doing three sliding doors, avoid two door intersections; when doing two sliding doors, they should be placed in a door. Side; when the folding door is done, the drawer should have 17cm clearance from the side wall.
Fourth, the installation of cabinets. The professional and safe cabinet installation is generally completed by professionals. The steps are: First fix the top rail, the front rail surface is in the same plane as the cabinet surface, and the upper and lower rails are laid flat in the reserved position; then the two doors are installed in the track. Measure the verticality of the door with a ruler or ruler, adjust the positions of the upper and lower rails and fix it; check whether the door is parallel to both sides. Adjust the bottom wheel to adjust the door to reach the horizontal of the frame and the sides; The anti-jump device is fixed and presents a quality protection book. Users can check if the selected brand is professional according to this installation procedure.
Links: 6 important items for cabinet selection
Cabinets to buy space Home Furniture Doors Cabinet Doors Closet Closet Doors Chests of drawers
Angular contact ball bearings mainly bear large unidirectional axial load. The greater the contact angle, the greater the load bearing capacity. The material of cage is steel plate, brass or engineering plastics. The forming method is stamping or turning. It is selected according to the bearing form or using condition. Others include combined angular contact ball bearings, double row angular contact ball bearings and four-point contact ball bearings.
Angular contact bearings are able to support radial load and axial load. As single row angular contact ball bearings can only support axial load in single direction, matched bearing mounting is often adopted to them as matched parts of bearings, preload for them is more convenient. Retainers are made of brass, synthetic resins or others subject according to individual bearing features and application conditions.
a=15 °7000C
a=25 °7000AC
a=40 °7000B
Angular Contact Ball Bearing
Bearing Brand
LS
Bearing Types
Angular Contact Ball Bearing
Bearing Material
Chrome steel Gcr15/Stainless steel
Bearing Precision
P0,P6,P5,P4,P2
Bearing Package
Plastic bag+carton box
Bearing Shipping
1-3 work days
Angular contact ball bearing include:
1) Single row angular contact ball bearing
2) Matched angular contact ball bearing
3) Double row angular contact ball bearing
4) Four-point contact ball bearing
Angular Contact Ball Bearing,P4 Angular Contact Ball Bearing,High Speed Angular Contact Ball Bearing,Double Row Angular Contact Ball Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.lsjgbearing.com