We all know that there are many types of floor tiles, and they also have some understanding. However, there are still many owners who do not know much about the purchase of floor tiles , and they often consult Xiaobian. Today, with the small series to see the floor tile material purchase skills for your reference oh.
Floor tile material selection skills view floor tile appearance quality
According to national standards, the floor tiles are divided into four grades: excellent grade, first grade, second grade, and others. The appearance quality can be determined by the appearance. Viewing the appearance mainly includes checking whether there is a large difference in color between tiles of the same product name; whether the corresponding lengths of the same kind of bricks are the same; whether the lengths of the same bricks on the opposite sides are the same or not; whether the tiles are deformed, the edges are not straight, warpage, etc.; Whether there are defects on the surface of the floor tile, such as unevenness, pinholes, dregs, falling angles, etc.
Floor tile material purchase skill detection tile water absorption
Water absorption is an important factor affecting the quality of floor tiles. Floor tiles with high quality generally have low water absorption. Tiles with higher water absorption rate are more likely to absorb water. After shrinkage and thermal expansion, cracks on the surface of the tile will occur and the entire tile will peel off. If the tile does not indicate water absorption, then tea or water droplets can be used on the back of the tile. After a minute, the degree of diffusion of the water droplets was inspected. The less water absorption, the lower the water absorption rate and the better the quality.
Floor tile material purchase skills view floor tile environmental protection and quality monitoring report
Since the raw material is natural stone, the tile product is generally radioactive. According to the national environmental protection standards, the radioactive level of decorative materials is divided into three categories: A, B, and C. The production, sales, and use of Class A decorative materials are not limited. For floor tiles in the interior, it is best to choose A products. Check the environmental monitoring report for floor tiles to see which category the product belongs to. In addition, polished tiles must have a national compulsory product certification (3C for short). When selecting a polished tile, pay attention to the report.
Other detection methods for floor tiles
1. Check the bearing capacity of the floor tiles: You can place the floor tiles obliquely, and then stand up for adults. After a period of time, see if the floor tiles have obvious cracking marks. Good floor tiles should have good load-bearing properties;
2, check the wear resistance of floor tiles: In general, the floor tiles are very hard and wear-resistant, you can use the key and other hard objects on the surface of the floor tiles to see is to leave clear traces;
3, check the stain resistance: floor tiles need to have a strong anti-fouling, you can use water-based pen to write on the floor tiles, and then wipe with a damp cloth to see if you leave a handwriting.
Information about the floor tile material was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Floor Tiles Buying Tips
High Mast Lights,High Mast Lights Pole,High Mast Light
China Searun Solar Solution Co., Ltd. , https://www.srsolarlights.com