Wood flooring is one of the common building materials used in modern home improvement floors. The so-called floor is "three-point floor, seven-point installation", that is, the installation is good or bad, which determines the floor quality of 70%. If the floor covering is not in place, it may cause the floor to warp, squeak, and even arching in the future. Therefore, the floor installation must not be taken lightly. So, what steps are there in the floor installation ? Let's look at it together.
Detailed floor installation steps
1, laying a damp film
After the floor is clean, damp proof membranes should be laid on the ground. The first is to prevent moisture, and the Other is to avoid shock and reduce pedaling sound. The moisture-proof film must completely cover all the laid floors, and the seams should be sealed with adhesive tape. After all the dampproof membranes are laid, you can begin to install the floorboards. If your home is uneven, it is recommended to use bedding treasures. The bedding treasures can be used for sound insulation, heat preservation, improved footfeel, moisture proofing, and elevation of the ground for laying pipes. , adjust the height difference between the tile and other functions.
2. Flooring
Open the floor package and begin paving the floor. If the owner is present, it is best to select the floor pattern yourself and place the pattern in the furniture position in which the pattern is not very beautiful or has obvious scars, so that it can be blocked.
3, floor stitching
The edge of the floor is to be inserted with a mallet tip against the wall so that the floors are close together seamlessly. Generally two pieces of splicing will use a hammer to tap the short end of the floor, let it close to the other. Get close to the wall and use professional tools to tighten the last floor and knock it tight.
4, from the inside out
The floor is paved from the inside to the outside and paved from the entrance to the living room to the room, simulating the walking route of the person's entry. This has a continuity. There must be a certain gap between the floor splicing to ensure the wood's flexibility.
5, to fill the gap
Touch corners or splices, you need to cut the floor, and then spliced ​​to the wall. Keep a gap of 8-10 mm between the floor and the wall to ensure the thermal expansion and contraction of the wood. After this gap will be filled with a baseboard.
6, install the baseboard
After all the floors are tightly packed, take out the raft that is inserted into the floor around the wall, install the baseboard, and cover the gap between the floor and the wall; the floor and the joints of marble or other materials need to use wood panels Link. The slats are similar to the color of the floor and are glued between the two floors with special glue and compacted.
Summary: The above introduced the detailed steps for floor installation . I believe we have a general understanding of floor installation . If you want to learn more about this, please continue to pay attention to this website information platform.
Floor installation
kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets-jm.com