CNC cutting machine in the processing of cutting parts is required to follow the instructions for operation, for different materials, the operation steps and the attention to the details are different, the following as Changzhou CNC cutting machine industry leader Changzhou City Ainuowei Machinery Equipment Co., Ltd. to speak for everyone Speaking of cutting thick parts is the need to pay attention to tips 1, pre-cut parts to be cut in advance, such as the method of repeated forging uniform organization, cleaning impurities.
2. Use a coolant with a higher dielectric constant, stronger recovery of insulation, and better mobility and drainage.
3. The feed method of partial feed line feed or active feed two feed back, so that the gap is usefully expanded.
4, greatly improve the pulse voltage, so that the discharge gap increases, water entry and discharge is also relatively easy CNC machine tool industry and macroeconomic dependence, the country's continuous improvement in deposit reserve ratio and other factors, are to equipment manufacturing The industry's CNC cutting machine tool market has brought a lot of impact, and the decline in the sales of ordinary CNC cutting machine tools and low-end machine tool equipment is particularly remarkable. The preheating setting of the CNC flame cutting machine is one of the flame flame temperature adjustment. In the actual operation, the length of warm-up time of the CNC flame cutting machine needs to be considered according to the thickness of the cut. Does it mean that the higher the flame temperature, the better the cutting effect? The Oxygen-Gas Cutting process of a CNC Flame Cutter is a process in which a stream of pure oxygen (at least 99.5%) is ignited and burned on the surface of the workpiece. The heating flame starts by heating the starting point of the workpiece to be cut to the ignition temperature. .
2. Use a coolant with a higher dielectric constant, stronger recovery of insulation, and better mobility and drainage.
3. The feed method of partial feed line feed or active feed two feed back, so that the gap is usefully expanded.
4, greatly improve the pulse voltage, so that the discharge gap increases, water entry and discharge is also relatively easy CNC machine tool industry and macroeconomic dependence, the country's continuous improvement in deposit reserve ratio and other factors, are to equipment manufacturing The industry's CNC cutting machine tool market has brought a lot of impact, and the decline in the sales of ordinary CNC cutting machine tools and low-end machine tool equipment is particularly remarkable. The preheating setting of the CNC flame cutting machine is one of the flame flame temperature adjustment. In the actual operation, the length of warm-up time of the CNC flame cutting machine needs to be considered according to the thickness of the cut. Does it mean that the higher the flame temperature, the better the cutting effect? The Oxygen-Gas Cutting process of a CNC Flame Cutter is a process in which a stream of pure oxygen (at least 99.5%) is ignited and burned on the surface of the workpiece. The heating flame starts by heating the starting point of the workpiece to be cut to the ignition temperature. .
LED Downlight,Led Flood Lamp,Ip66 Led Flood Light,Outdoor Led Flood Lights
Guangdong Smart Street Lighting Co., Ltd , https://www.gdfldlight.com