On July 15-16, 2010, the 2010 Advanced Manufacturing Process and Tool Technology Seminar and the 14th National Automotive Industry Tool System Process Equipment Design and Manufacturing Technology Exchange Conference were successfully held with the enthusiastic participation of the guests.
The seminar was jointly sponsored by the Advanced Technology and Tool Technology Institute of Shanghai University and the Tool Technology Professional Committee of the Automobile Manufacturing Branch of the China Automotive Engineering Society. The Shanghai Metal Cutting Technology Association, the Shanghai Management Science Association Outsourcing Management Committee, and the Adsale Exhibition. Co-organized by Dongbo (International) Exhibition and China Automotive Conference Network, and undertaken by Shanghai University Advanced Technology and Tool Technology Research Institute. The seminar received high attention from all fields of the industry. The number of participants reached more than 350. It brought together industry experts and professors from well-known universities and research institutes at home and abroad, well-known machine tool manufacturers at home and abroad, well-known automobile brand manufacturers and other manufacturers. Professionals in the process and tool industry. They explained the advanced manufacturing process and tool technology, application concepts and development trends from different angles, aiming to improve the manufacturing level of China's manufacturing industry and promote the transformation of China's tool industry from a manufacturing country to a manufacturing power.
The opening ceremony of the conference was initiated by the initiator of the "Shanghai University Advanced Technology and Tool Technology Research Institute" and the initiator of the "Advanced Manufacturing Process and Tool Technology Seminar", hosted by Dr. Wang Yongguo from Shanghai University. Vice President Wang Min of Shanghai University welcomed the guests. Words, Director of the Tool Technology Committee of China Automotive Engineering Society, Mr. Peng Zelong, Director of Dongfeng Motor Corporation's Blade Measuring Tool Factory, delivered a speech on behalf of Mr. Wu Jianjun, Chairman of the Tool Technology Professional Committee; Honorary Chairman of China Machine Tool Industry Association, Machine Tool of the former Ministry of Machinery Industry Professor Liang Xunqi, Director of the Bureau and Chief Engineer, delivered a speech and congratulated the meeting on its successful convening. At the same time, Shanghai University and Shanghai Tools Factory Co., Ltd., SAIC Motor Vehicle Engine Factory, National Tungsten Material Engineering Technology Research Center, Xiamen Golden Heron Special Alloy Co., Ltd., Anke Machine Tool (Shanghai) Co., Ltd. (ANCA), Jiangxi Changhe Suzuki Automobile Co., Ltd., Arnold (Suzhou) Tool Co., Ltd. (AHNO), Shanghai Mapa Trading Co., Ltd. (MAPAL) and other related units graduated the joint training ceremony.
During the meeting, the former Minister of Equipment of the China Automotive Engineering Society, now the vice chairman of the China Automotive Engineering Society Manufacturing Equipment Branch, Chen Changnian, the executive secretary of the China Automotive Manufacturing Equipment Innovation Alliance; Feng Pingfa, secretary of the Party Committee of the Fine Instrument Department of Tsinghua University; Concordia, Canada Professor Chen Zezhong; Professor Zhang Weimin of Tongji University School of Mechanical Engineering; Erwin Geissler, General Manager of Germany Volmer (Taicang) Machinery Co., Ltd.; Tang Xinkang, Manager of Anke Machine Tool (Shanghai) Co., Ltd.; Ke Yashi, President of Arnold (Suzhou) Tool Co., Ltd.; Oerlikon Jin Min, Manager of Balzers Coatings (Suzhou) Co., Ltd.; Lucien Peeters, Manager of Haoze Coating Technology (Shanghai) Co., Ltd.; Liu Shufeng, General Manager of Zhengzhou Bote Hard Materials Co., Ltd.; Professor Quan Yanming, South China University of Technology; Manager of the company; Li Liang, professor of Nanjing University of Aeronautics and Astronautics; Liu Tao, manager of Danish Unimog Tool (Wuxi) Co., Ltd.; Li Ming, manager of Germany Erwin Jonke Machinery Manufacturing Co., Ltd.; Chen Fayong, director of blade windmill factory of Dongfeng Motor Corporation Guests represent production and learning And research has done a wonderful report in various fields.
The symposium also held a grand welcome dinner, and Dr. Wang Yongguo hosted a welcome dinner. Vice President Wu Song of Shanghai University delivered a welcome speech; Mr. Wu Gaochao, Managing Director of Xiamen Jinlu Special Alloy Co., Ltd., delivered a speech instead of Chairman Wu Chongxin, expressing his support for the seminar; Mr. Ding Zhihong, the senior account manager of DMG China Automotive Industry, also published A warm speech. Dr. Wang Yongguo expressed his gratitude to the guests who participated in the seminar and the experts who have supported the Shanghai Institute of Advanced Technology and Tool Technology and the Advanced Manufacturing Process and Tool Technology Seminar. At the dinner, representatives and guests from various fields on technology and application In-depth exchanges and discussions on various aspects such as research and development.
The guests and listeners attending the seminar said that the seminar was jointly organized with the automotive industry tool system process equipment design and manufacturing technology exchange meeting, and borrowed the advantages of time, location, and people in terms of favorable policies, market demand and technology research and development investment. To adapt to the five major trends of high-efficiency, intelligent, flexible, green and precise machining in the automotive industry, how to provide a communication platform for domestic enterprises to catch up with technology or service level as soon as possible or to exceed foreign brands. At the seminar, the role of the expert team also provided a forward-looking thinking for the domestic manufacturing and tool industry. The corresponding solutions were proposed for the technical problems in the manufacturing process and the difficult problems encountered in the cultivation of enterprise talents. This seminar is a grand meeting of theoretical research and implementation effectiveness.
The seminar was jointly sponsored by the Advanced Technology and Tool Technology Institute of Shanghai University and the Tool Technology Professional Committee of the Automobile Manufacturing Branch of the China Automotive Engineering Society. The Shanghai Metal Cutting Technology Association, the Shanghai Management Science Association Outsourcing Management Committee, and the Adsale Exhibition. Co-organized by Dongbo (International) Exhibition and China Automotive Conference Network, and undertaken by Shanghai University Advanced Technology and Tool Technology Research Institute. The seminar received high attention from all fields of the industry. The number of participants reached more than 350. It brought together industry experts and professors from well-known universities and research institutes at home and abroad, well-known machine tool manufacturers at home and abroad, well-known automobile brand manufacturers and other manufacturers. Professionals in the process and tool industry. They explained the advanced manufacturing process and tool technology, application concepts and development trends from different angles, aiming to improve the manufacturing level of China's manufacturing industry and promote the transformation of China's tool industry from a manufacturing country to a manufacturing power.
The opening ceremony of the conference was initiated by the initiator of the "Shanghai University Advanced Technology and Tool Technology Research Institute" and the initiator of the "Advanced Manufacturing Process and Tool Technology Seminar", hosted by Dr. Wang Yongguo from Shanghai University. Vice President Wang Min of Shanghai University welcomed the guests. Words, Director of the Tool Technology Committee of China Automotive Engineering Society, Mr. Peng Zelong, Director of Dongfeng Motor Corporation's Blade Measuring Tool Factory, delivered a speech on behalf of Mr. Wu Jianjun, Chairman of the Tool Technology Professional Committee; Honorary Chairman of China Machine Tool Industry Association, Machine Tool of the former Ministry of Machinery Industry Professor Liang Xunqi, Director of the Bureau and Chief Engineer, delivered a speech and congratulated the meeting on its successful convening. At the same time, Shanghai University and Shanghai Tools Factory Co., Ltd., SAIC Motor Vehicle Engine Factory, National Tungsten Material Engineering Technology Research Center, Xiamen Golden Heron Special Alloy Co., Ltd., Anke Machine Tool (Shanghai) Co., Ltd. (ANCA), Jiangxi Changhe Suzuki Automobile Co., Ltd., Arnold (Suzhou) Tool Co., Ltd. (AHNO), Shanghai Mapa Trading Co., Ltd. (MAPAL) and other related units graduated the joint training ceremony.
During the meeting, the former Minister of Equipment of the China Automotive Engineering Society, now the vice chairman of the China Automotive Engineering Society Manufacturing Equipment Branch, Chen Changnian, the executive secretary of the China Automotive Manufacturing Equipment Innovation Alliance; Feng Pingfa, secretary of the Party Committee of the Fine Instrument Department of Tsinghua University; Concordia, Canada Professor Chen Zezhong; Professor Zhang Weimin of Tongji University School of Mechanical Engineering; Erwin Geissler, General Manager of Germany Volmer (Taicang) Machinery Co., Ltd.; Tang Xinkang, Manager of Anke Machine Tool (Shanghai) Co., Ltd.; Ke Yashi, President of Arnold (Suzhou) Tool Co., Ltd.; Oerlikon Jin Min, Manager of Balzers Coatings (Suzhou) Co., Ltd.; Lucien Peeters, Manager of Haoze Coating Technology (Shanghai) Co., Ltd.; Liu Shufeng, General Manager of Zhengzhou Bote Hard Materials Co., Ltd.; Professor Quan Yanming, South China University of Technology; Manager of the company; Li Liang, professor of Nanjing University of Aeronautics and Astronautics; Liu Tao, manager of Danish Unimog Tool (Wuxi) Co., Ltd.; Li Ming, manager of Germany Erwin Jonke Machinery Manufacturing Co., Ltd.; Chen Fayong, director of blade windmill factory of Dongfeng Motor Corporation Guests represent production and learning And research has done a wonderful report in various fields.
The symposium also held a grand welcome dinner, and Dr. Wang Yongguo hosted a welcome dinner. Vice President Wu Song of Shanghai University delivered a welcome speech; Mr. Wu Gaochao, Managing Director of Xiamen Jinlu Special Alloy Co., Ltd., delivered a speech instead of Chairman Wu Chongxin, expressing his support for the seminar; Mr. Ding Zhihong, the senior account manager of DMG China Automotive Industry, also published A warm speech. Dr. Wang Yongguo expressed his gratitude to the guests who participated in the seminar and the experts who have supported the Shanghai Institute of Advanced Technology and Tool Technology and the Advanced Manufacturing Process and Tool Technology Seminar. At the dinner, representatives and guests from various fields on technology and application In-depth exchanges and discussions on various aspects such as research and development.
The guests and listeners attending the seminar said that the seminar was jointly organized with the automotive industry tool system process equipment design and manufacturing technology exchange meeting, and borrowed the advantages of time, location, and people in terms of favorable policies, market demand and technology research and development investment. To adapt to the five major trends of high-efficiency, intelligent, flexible, green and precise machining in the automotive industry, how to provide a communication platform for domestic enterprises to catch up with technology or service level as soon as possible or to exceed foreign brands. At the seminar, the role of the expert team also provided a forward-looking thinking for the domestic manufacturing and tool industry. The corresponding solutions were proposed for the technical problems in the manufacturing process and the difficult problems encountered in the cultivation of enterprise talents. This seminar is a grand meeting of theoretical research and implementation effectiveness.
cabinet furniture hardware,brass furniture hardware,black furniture hardware,bedroom furniture hardware
NINGBO TAURUS INDUSTRY CO.,LTD. , https://www.taurushardware.com