China Fire Hose of MYÂ
1. Textile Jacket; PVC lining;
2. Wide specs from 1" to 6" with working pressures
Â
Product name: china fire hose of MYÂ fire fighting equipment.
Â
Fire Hose Material: PVC lined,and textile jacket.The warp of the jacket is made by high strength polyester staple. And the weft must be high strength polyester filament with low elongation.
Â
Fire Hose Working pressure: 8 bar to 20 bar
Fire hose diameter: 1" to 6"
Length: 10 to 30meters or on your demand
Printing and color : according to your requirement
Packing: customized packaging available
 Â
A fire hose is a high-pressure hose used to carry water or other fire retardant (such as foam) to a fire to extinguish it. Outdoors, it is attached either to a fire engine or a fire hydrant. Indoors, it can be permanently attached to a building's standpipe or plumbing system.
Â
Quality Control
Pressure testing the hose
While the hose is under pressure, it is inspected for leaks and to determine that the couplings are firmly attached.After testing the hose is drained, dried, rolled, and shipped to the customer.
In addition to the final pressure testing, each hose is subjected to a variety of inspections and tests at each stage of manufacture. Some of these inspections and tests include visual inspections, ozone resistance tests, accelerated aging tests, adhesion tests of the bond between the liner and inner jacket, determination of the amount of hose twist under pressure, dimensional checks, and many more.
| Technical Requirements | Temperature Range | length | |||
|
Size (Inch/mm) |
Working Pressure (Bar/Psi) |
Burst Pressure (Bar/Psi) |
-22ºF to 158ºF (-30ºC to 70ºC) | 15-30m/50-100FT | |
| 1" | 25 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 1-1/2" | 38 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 1-3/4" | 45 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 2" | 52 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 2-1/2" | 65 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 3" | 75 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 4" | 100 | 8/125, 10/150, 13/190, 16/235. 20/300 | 24/375, 30/450, 39/570, 48/705. 60/900 | ||
| 5" | 125 | 8/125,10/150 | 24/375, 30/450 | ||
| 6" | 150 | 8/125,10/150 | 24/375, 30/450 | ||
Doosan`s products are known for their durability, quality, and energy efficiency. As such, we want to see your Doosan machinery remain in use for as long as possible. If you need a replacement Doosan Final Drive motor, contact us today!Doosan Final Drive,Doosan Final Drive Assy,Doosan Travel Motor,Doosan Travel Gearbox,Doosan Final Drive Spare Parts,Doosan Drive Parts,Doosan Motor.
JUHENG are pleased to support operators with a wide range of genuine, OEM and quality replacement Doosan excavator final drives, swing drives, recoil springs and slew rings that are guaranteed to fit and perform to specification.
Doosan Excavator Final Drive, Hydraulic Pump and Other Components
Investigate below the stock availability for your Doosan excavator part. If a unit is available and you order before 3pm we despatch worldwide the same day.
An excavator final drive and Swing Motor assembly can be of two types: plug-in motor and gearbox, or totally integrated units. The design of your drive will dictate what options are available. The approaches adopted by final drive manufacturers and swing motor manufacturers are outlined below.
The model, serial and part number information can be found on the product plate; some examples are shown here. If it is missing or damaged, you may recognise your drive from the photos shown below. This will help your FDC Partner identify the correct replacement options.
Doosan Final Drive,Doosan Final Drive Assy,Doosan Travel Motor,Doosan Travel Gearbox,Doosan Final Drive Spare Parts,Doosan Drive Parts,Doosan Motor
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.juheng-cn.com