The faucet is an indispensable hardware item in the home, and it is also a necessary condition for domestic water use. What are the precautions for tap installation ? What are the components of the faucet? The following Xiao Bian took everyone to take a look!
Faucet Installation Notes - Ask a Professional to Install
1. When installing a faucet at home, it is recommended that professional installation masters perform the installation. In particular, there are many accessories for faucets, which require step-by-step installation. If there is a link that is not done well, there will be leaks.
2. Precautions for installation of faucets - Do not bump into hard objects during installation
During installation, the tap cannot collide with other hard objects, and some cement, glue, and other debris cannot remain on the surface of the faucet, otherwise it will affect the gloss of the surface coating.
3, faucet installation precautions - exclude debris in the water pipe
If the houses in the house are newly built, the water pipes are newly laid. Therefore, when installing the faucet, pay attention to whether the water contains impurities such as sand and other impurities. It is recommended to discharge water for a long time so that the impurities in the pipes can be removed and the water quality can be changed. It's more clear.
4, tap installation considerations - open the tap to light
After the faucet is installed, the action of the faucet is light when it is turned on, and it will cause damage. Even traditional taps cannot be used and tightened when closed. Always wipe the faucet surface after use.
Which components make up the tap :
1, single control valve
The single control valve in the faucet consists of lead brass and a small number of ceramic plates and silicone O-rings. The water flow of the faucet is mainly controlled by rotation, and the maximum rotation is 90 degrees.
2, filter
The filter in the tap mainly acts as a filter, so that the use of water is cleaner. Most of the taps on the market will use it, and there are many types and materials of filters. The effect of different materials and types is not the same.
3, rubber parts
The rubber o-rings and Y-rings in the faucet play a sealing role and are classified into dynamic and static seals.
4, hose
The hoses are mainly used for water intake, and the hoses for bathroom use usually need to be pulled out.
5, mounting parts
The fittings in the faucet include the M8 single control horseshoe pad, the M6 ​​double hole horseshoe pad, and the M6 ​​double hole extra drawing horseshoe pad and so on.
Concluding remarks: The above is the relevant content of the faucet installation notice and the faucet components which are introduced for everyone, hoping to bring help to the friends in need. In addition, if the faucet in your house is used for a period of time, if there is a reduction in water volume or the water heater is turned off, it is recommended to cut off the flow of hot and cold water immediately, remove the mouthpiece cover and clean it, and then put it on.
Piston Seals and Rod Seals are important seals used in mechanical equipment. Their main function is to prevent liquid and gas leaks and ensure the normal operation of mechanical equipment. Piston seals and rod seals are usually used in hydraulic and Pressure system, such as hydraulic cylinders and Pneumatic cylinder. The quality and performance of these seals directly affect the efficiency and lifespan of mechanical equipment.
The classification of piston seals and rod seals is mainly based on their material and design structure. According to the different materials, they can be divided into rubber seals, polyurethane seals, polytetrafluoroethylene seals, metal seals, etc. According to the different design structures, they can be divided into unidirectional seals, bidirectional seals, rotary seals, etc.
Rubber seals are a common type of seal, and their main material is rubber. Rubber seals have good sealing performance and wear resistance, and are suitable for medium and low pressure hydraulic systems and Pressure system. Polyurethane sealing element is a high-performance sealing element, and its main material is polyurethane. Polyurethane seals have high wear resistance, high temperature performance and high pressure performance, and are suitable for high-pressure hydraulic systems and Pressure system. PTFE sealing element is a corrosion-resistant sealing element, and its main material is PTFE. PTFE seals have excellent corrosion resistance and high temperature resistance, making them suitable for fields such as chemical and food processing. Metal seals are a type of high-temperature and high-pressure seal, mainly made of metal. Metal seals have high temperature and high pressure performance and corrosion resistance, and are suitable for high temperature and high pressure hydraulic systems and Pressure system.
Unidirectional seals and bidirectional seals are classified based on different sealing directions. A unidirectional seal can only prevent the leakage of liquid or gas from one direction, while a bidirectional seal can prevent the leakage of liquid or gas from both directions. Rotating seal is a type of seal that can rotate and is mainly used for sealing rotating shafts. Rotary seals are divided into unidirectional rotary seals and bidirectional rotary seals.
Universal Piston and Rod Seals,Interchangeable Piston and Rod Seals,Versatile Piston and Rod Seals
DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com