Choose a few small cast iron products, placed on the sofa, carpet, dining table, can increase the taste of life. If space permits, a set of iron flower railings can be placed in the living room, and a swinging iron swing can be installed on the balcony to break the traditional monotonous layout and enrich the space. So how to maintain iron furniture? Xiaobian teaches you a few tricks:
6 maintenance measures for iron furniture
1. Avoid bumps.
This is the first thing to notice after purchasing wrought iron furniture. The furniture should be handled with care during handling; the place where the wrought iron is placed should be the place where the hard objects are not often encountered; once the place is selected, it should not be changed frequently. The floor on which the iron furniture is placed should also be kept flat so that the four legs of the furniture are stable and level. If the shaking is unstable, the wrought iron furniture will be slightly deformed over a long period of time, which will affect the service life of the furniture.
2. Clean dust.
It is best to use cotton knitwear as a rag to wipe the surface of wrought iron furniture. For dust in furniture and embossed patterns, it is best to use a soft wool brush to remove dust.
3. Keep away from acid and alkali.
Acids and alkalis that have a corrosive effect on iron are the "number one killer" of wrought iron furniture. If ferrous furniture is inadvertently contaminated with acid (such as sulfuric acid, vinegar) or alkali (such as alkali, soapy water, soda), it should be used immediately. Clean the dirt and clean it with a dry cotton cloth.
4. Stay away from the sun.
Where the furniture is placed, it is best to avoid direct sunlight from the window. Iron furniture will be exposed to the sun for a long time, which will make the paint color change; the pigmented paint layer will be cracked and peeled off, and the metal will be oxidized and deteriorated. If you encounter strong sunlight and cannot remove the furniture, you can use curtains or blinds to block it.
5. Isolate from moisture.
The humidity in the room should be maintained within normal values. The furniture should be kept away from the humidifier, the moisture will cause corrosion of the metal, and the chrome will be stripped. When the furniture is clean, avoid washing the furniture with boiling water. Wipe it with a damp cloth, but do not rinse it with running water.
6. Eliminate rust.
If the furniture is rusted, don't make your own use of sandpaper. If the rust is small and shallow, it can be applied to the rust with cotton gauze oil. After a while, use a cloth to wipe off the rust. If the rust has been enlarged and become heavy, the technician should be asked to repair it.
Naips LED Emergency Ceiling Light-A power failure light with a modern design that provides high quality lighting with an adjustable cct color switch attached to each fixture. Every round light fixture is pre-installed with the built-in lithium ion emergency batterry pack, damp location rated for reliability, ETL listed for your safety, is 85-265V AC input, has a brushed chrome finish, and backed by a 5 YEAR WARRANTY.
Led Emergency Ceiling Light,Emergency Led Ceiling Light,Emergency Light For Ceiling,Emergency Light Ceiling Type
Foshan Nai An Lighting Electric Co.,ltd , https://www.articalight.com