The natural comfort and practicality of solid wood flooring has been sought after by many consumers. When selecting solid wood flooring, only knowing every detail and understanding various indicators and requirements can help us better purchase satisfactory materials. .
Clear solid wood floor size
The solid wood floor in the market is now generally divided into three sizes. The smaller the size of the solid wood floor, the stronger the resistance to deformation. Therefore, in general, it is most reasonable to choose a floor with a size smaller than 600mmx75mmx18mm. There should be a corresponding anti-deformation groove that should be carefully checked at the time of purchase.
Understand product wear and hardness
The floor is used as the decoration material for the floor in the home, and the wear amount is very large. Therefore, when purchasing, we need to pay attention to the purchase of products with good wear resistance and hardness. Generally speaking, the floor is determined by the specific gravity. The floor with higher hardness generally has better wear resistance.
Recognize product moisture content
Solid wood flooring is used as a material for direct drying of natural wood, so its moisture content directly affects the service life of the product. The moisture content of the floor we generally purchase must be consistent with the local equilibrium moisture content, and the difference should not exceed 2%. Conducive to the long-term use of solid wood flooring to avoid moisture.
Observing wood texture
Texture is one of the important signs to judge the quality of solid wood flooring. The texture of good solid wood flooring is clear and beautiful. There is no heavy paint layer on the surface, and there is no messy texture. At the same time, the color of good wooden floor will not be disturbed by the paint layer. Those should be able to see at a glance the natural texture and color of the wood.
Observing the wood knot
Some consumers will choose to choose a solid wood floor when they choose a floor without a knot, but on the other hand, the knot is also an important trace of the quality of solid wood flooring. How to save money? Design budget quotes. For all solid wood materials, the knot is an inevitable existence, but at the same time the number of knots can not be more. When selecting, it is necessary to see that the knots on the floor are all living joints, if there is a non-compact defect type. For the knot, you need to be careful to buy and avoid inferior products.
Check floor splicing
Regardless of whether it is a flat floor or a tongue-and-groove floor, the quality of the joints can not be neglected. When purchasing, try to slide with two solid wood floor troughs to check whether the relative sliding between the board and the board is smooth. At the same time, the joint is flat, with or without roughness or protrusion.
Welded Wire Mesh
It is widely used as machine protecting mesh, garden or residential fence and livestock cage in industrial or agricultural area. In addition, according to different flexibility, welded wire mesh can be divided into 2 types: welded mesh roll and welded Mesh Panel. The former has better flexibility.
Welded Wire Mesh,Electro Galvanized Welded Wire Mesh,Hot-Dipped Galvanized Welded Wire Mensh,Black Welded Wire Mesh
HENGSHUI YUZHENG IMPORT AND EXPORT CO., LTD. , https://www.yzironnails.com