Bright maintenance of the floor
Because we often use water to wipe the floor, there is no light on the floor after wiping, and long-term rubbing will seriously affect the original paint on the floor. Therefore, the water is not good for the floor, usually should try not to use water to wipe the floor, only use the electrostatic mop dedicated to the floor dry rub, if there is a more difficult to wipe the stain, just wipe with a damp cloth.
How to keep the floor bright for a long time and restore the luster to the floor
Regularly oiling the floor (usually once a month) allows the floor to remain bright for a long period of time. Although the floors that have been used for a while are grayed out, there is no major damage to the floor's original paint surface. In this case, We will finish the floor once every two weeks for the floor and finish on the floor once a month. The floor will be able to restore the original light. It is impossible to restore the original brightness when the floor finish is worn out. We gave the floor a super-bright or coloring treatment. When the floor paint surface was seriously worn and had damaged the floor itself, we would consider that the floor surface would be ground off 0.5 mm to re-paint and wax the floor.
Solid wood flooring has a high requirement for paving. Once the paving is not done well, it will cause a series of problems, such as sound and so on. If the indoor environment is too humid or dry, the solid wood floor is prone to arching, warping or deforming. Paving and oiling are often required after paving, otherwise the gloss of the floor surface will soon disappear. There are a lot of inconveniences in the use of the average family, so now many families like solid wood flooring began to consider some alternatives in the decoration, such as Mok living wood this non-wood material, but in the visual texture and hardwood flooring almost no difference in high quality product
Prevents and restores cracked floors
Because the weather in the south is too humid, the water damage on the floor itself and the loss of natural resin will gradually affect the service life of the floor for a long time. In this case, we must regularly supplement the floor with moisture and natural resin to prevent and restore the floor. Cracked floors and seams become larger. The use of natural wood oil or strong moisturizing treatment restores the original appearance and increases the service life.
Moistureproof, mildewproof, anti-deformation
When installing the floor, be sure to choose the weather (sunny weather, it is sunny and not raining for 7 days or so). (Do not install the floor before the ground does not dry out) People and (must find a professional worker to install the floor for you ) And put professional moisture-proof products under the floor to prevent the floor from getting wet.
Prevention and treatment of small cracks
Regularly oiling and waxing the floor in a timely manner can effectively prevent and control cracks in the floor.
Preventing and Restoring Flooring Scratches We should finally install wooden floors during the renovation so that we will not cause scratches on the floor due to improper construction. After installation, the floor should be given a layer of floor wax or oil before installation into the furniture. A protective film is formed on it to prevent scratches. If the floor has been scratched, it can be slightly added with wax, such as a deeper fixed point repair, to ensure the use of the floor and beautiful.
Prevent the floor from rising
Because the floor is made of wood, etc., it has the absorbability of the trees themselves. If the humidity around the floor is too high, the floor will expand and deform due to excessive moisture. Especially solid wood flooring, below the keel, the keel is white wood, without going through the floor process, it is more easily deformed. The floor is deformed, inflated, and it will make a buzzing noise when walking on it. Therefore, we need to have a moisture-proof product placed under the floor for days, geography, and people. Apply wood oil on the surface of the floor regularly to replenish moisture, natural resin, and prevent excessive moisture penetration.
Sterilizing
Due to improper cleanliness over a long period of time, we live in polluted cities and the floor is an environment that is extremely adaptable to the survival of bacteria.
It should be cleaned and sterilized in time to ensure the health of the family.
Anti-skid treatment
We all encounter the phenomenon of wrestling due to the smooth surface of the floor, especially for families with older people. We should make anti-skid treatment for the floor to ensure the personal safety of the family.
Floor repair
When the floor is in use, due to the movement of people, the movement of the furniture and the falling of the appliance can cause damage, scratches, and paint stripping to the floor.
1. When the floor is repaired and scratched, the dust and stains inside the scratch should be cleaned first.
2. Adhesive tape is applied on both sides of the scratch to be repaired to prevent the repair agent from sticking to the scratched floor surface.
3. Call out the same color and complementary color as the original floor color.
4, to be complementary, the use of professional floor repair solution to flatten the floor.
5. Wait until the floor repair agent is dry before painting the floor (Note: 0.1 mm higher than the original floor surface)
6, until the paint is dry and then use a special tool to level the floor, and restore the same as the original floor.
7, then oil the floor, you can wax.
Floor renovation
Generally, the floor material is better. After being used for a long time, the floor itself does not shrink or deform, and the floor surface paint has been dull and scratched, and it loses its luster and appearance when used.
In this case, it is a pity that the floor itself is of good quality and high cost, such as replacement. People usually choose to refurbish.
1, using a professional floor refurbished machine in the floor surface grinding about 0.5 mm, the original old paint surface grinding off the corner with a small angle grinder polished flat.
2, with putty powder to smooth the floor, Tim stitch.
3, after the putty is dry, use a fine sandpaper to polish the flat (according to customer requirements for the floor coloring)
4, according to customer requirements for the floor painted with light or Yaguang paint.
5. After the paint is dry, oil the floor and wax it.
6, small area from the Alice, a small deformation area according to the situation focus on maintenance.
Building materials knowledge floor purchase home maintenance paint home decoration home window furniture decoration home
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcell.com