China board trading network news:
Recently, the Consumer Products and Industry Department of the Ministry of Industry and Information Technology released the news that China's home industry has slowed down for the third consecutive year. In 2013, the growth rate of main business income was 14.3%. Since then, this speed has been declining year by year. It was 10.9% in 2014 and 9.3% in 2015. In 2016, it decreased by 0.7% to 8.6%. Similar to the overall domestic economic situation, China's home furnishing industry has already bid farewell to the “boom†era and entered a new normal stage of steady development.
China's home industry bid farewell to the “boom†era
According to data obtained from the Consumer Products Industry Division of the Ministry of Industry and Information Technology, from January to December 2016, the main business income of furniture manufacturing industry was 855.95 billion yuan, a cumulative increase of 8.6% year-on-year; total profit was 53.75 billion yuan, a cumulative increase of 7.9% year-on-year. The production and sales rate of furniture manufacturing industry was 97.9%, which was 0.3% lower than that of 2015. As of the end of 2016, China's furniture industry reached 5,561 enterprises above designated size, an increase of 271 from the previous year. According to relevant data, the growth rate of the main business income of China's furniture manufacturing industry has been slowing for the third consecutive year. In 2013, the growth rate of main business income was 14.3%. Since then, this speed has been declining year by year. It was 10.9% in 2014 and 9.3% in 2015. In 2016, it decreased by 0.7% to 8.6%. Of course, the furniture industry is still 3.7 percentage points higher than the national industrial growth rate, and the growth rate of the latter is 4.9%.
In terms of profits, the growth rate of China's home-made manufacturing industry in 2016 was 6.1 percentage points lower than that of 2015, which was 7.9%. Compared with the growth rate of national industrial profits, it was 0.6 percentage point lower, and the growth rate of the latter was 8.5%. On the export side, according to the customs data, the cumulative amount of household and parts exports from China in January-November 2016 was US$42.832 billion, a cumulative decrease of 9.67% year-on-year. It should be noted that while the export volume is declining, the export volume is growing. . According to industry insiders, this indicates that the export prices of single-family products have decreased, but the international share of household export trade has not been reduced.
"Consumption upgrade" promotes home industry transformation
In the new normal stage, people’s consumption habits gradually transition from food and clothing consumption to individual consumption. People’s demand for home products not only meets their basic function of use, they prefer to add more independent creative ideas in home life, and pay more attention to design concepts. , brand connotation and health and environmental protection and other factors, too popular and standardized home products have been unable to meet the needs of consumers. At present, custom home products, which tend to be more personalized and integrated, have been widely accepted by consumers. The social awareness and market demand for customized home products have been continuously improved.
In order to meet the market development trend and meet consumer demand, China's home production companies must increase investment in the original design and development, improve the level of production technology, improve product and substrate environmental standards, increase brand value, expand brand influence, Continuously enhance the market competitiveness, and optimize the allocation of industry resources through brand operation, design and services, and promote the transformation and upgrading of the industry.
At present, the construction industry is changing rapidly, whether it is demand structure or national policy, technology and management. Advantageous enterprises continue to grow, ordinary companies feel cold, and some companies are crying out in desperation. This is an era of development. It is also an era of redistribution of wealth. It is an era of differentiation. The trend of accelerating "division" is coming.
The above information, relevant Baoyuan plate supply information, plate purchase, etc. Please pay attention to the Chinese plate trading network
Industrial applications editor broadcast
Whetstone sintered corundum (ruby) : A kind of microcrystalline corundum product sintered at high temperature. It has a compact and delicate structure and high hardness and strength.
The products are rosy red. The products are small grinding wheel type whetstone, standard type whetstone and grinding head type whetstone. When grinding the workpiece, it can maintain sharp edge and stable geometry for a long time.
It is suitable for forming and grinding of instrument industry, precision parts, micro cutting tools, tools and precision abrasive tools, etc. The precision surface roughness of machining can reach about 0.05μm.
Product SPECIFICATIONS: flat sand wheel whetstone with diameter less than 100 for small grinding wheel type, whetstone with various geometric shapes less than 200*50*25 for standard type, whetstone with diameter less than 25 for grinding head type.
Grinding method
About diamond grinding paste, particle size from W40 to W0.5. W40 is the coarsest, with a large amount of grinding, and W0.5 is the smallest. It is used for polishing, and it does not anneal, and it can also grind the hard knife.
Method of use:
The coarse W40 abrasive paste applied to borotartar can accelerate and increase the grinding amount without annealing.
Then, AFTER the rough grinding paste on the knife is cleaned, W0.5 grinding paste is applied to the ruby or natural jade for polishing, and the effect thrown out is a mirror.
Green silicon carbide, white corundum, brown corundum of these three kinds of whetstone hardness is not enough, coupled with a little coarse particle size, easy to grind out the cross, and the other three kinds of whetstone in polishing, grinding will not annealing.
If the particle size is greater than 1000, there is no difference. It mainly depends on the grinding paste used. When the grinding paste of W1.5 is applied to the ruby with 1000 mesh, its grinding effect is the effect of the grinding paste of W1.5, that is, the effect of the whetstone with 2500 particle size
Grinding Stone,Diamond Grinding Pellets,Carborundum Oil Stone,Oilstone Sharpening Stone
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com