Proper installation, use and maintenance of the reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, when you install the gear unit, be sure to carefully assemble and use it in strict accordance with the following installation and use.
The first step is to confirm whether the motor and the reducer are intact before installation, and strictly check whether the dimensions of the parts connected to the reducer are matched. Here are the dimensions of the positioning boss of the motor, the input shaft and the reducer groove. tolerance.
The second step is to unscrew the screw on the dust-proof hole on the outer side of the reducer flange, adjust the clamp ring so that the side hole is aligned with the dust-proof hole, and insert the inner hexagon to tighten. After that, remove the motor shaft key. The third step is to naturally connect the motor to the reducer. When connecting, it must be ensured that the output shaft of the reducer is concentric with the input shaft of the motor, and the outer flanges of the two are parallel. As the heart is inconsistent, it will cause the motor shaft to break or the reducer gear to wear.
We are 10mm Blue Through-hole LED(DIP LED)
For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.
We supply kinds of 10mm Through-hole LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.
In this catalog, we mainly introduce the 10mm blue Through-hole LED.
For the bringhtness of 10mm blue through-hole LED, we have three level: common bright 10mm blue through-hole LED, super bright 10mm blue through-hole LED and ultra bright 10mm blue through-hole LED.
For the angle of 10mm blue through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.
10mm Through-hole LED, we supply 10mm blue LED with water clear lens, 10mm blue LED with diffused lens, 10mm blue LED with blue clear lens and 10mm blue LED with blue diffused lens. In addition, the shape can be 10mm round LED without flange(fringe), 10mm short head LED, 10mm bullet top blue LED, 10mm round blue LED with flange ect.
10mm blue Through-hole LED widely used for blue sign, display LED, indicator LED, die hole LED and 10mm round blue with lamp holder because of the high brightness and the small size.
10mm Blue Through-Hole LED, Super Bright 10mm Through-Hole LED, Oval Through-hole 10mm LED, Square Blue Through-Hole LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com