>>>How to choose the door stone at the floor connection?
What is the passstone?
In simple terms, passing stone is the stone threshold—a slate that solves the problem of height difference between inside and outside, solves the transition of two kinds of materials, blocks water, and has beautiful appearance.
Role explanation
Due to the material practices in different rooms, the ground thickness is different, resulting in height differences, and some materials are not good at “catch upâ€. For example, the living room or walkway indoor floor laminate flooring, about the thickness of about 12 to 15 (8 thick floor + 5 thick floor mats), and the bathroom floor tiles, there is the thickness of the cement mortar + tile thickness + surface water to find the slope thickness (about The correct way to find a slope on the ground is to solve the problem in a separate way. After completion, it is much higher than the floor. At the same time, the bathroom should consider that a small amount of normal water should not flow out to damage the floor. In this way, “passing the door stone†is one of the commonly used solutions.
Height difference
Usually, it is recommended that the door stone is slightly higher than the bathroom floor by 5 to 10 mm. Slightly blocking the height of the flow can be, one is beautiful, the second is as little as possible at the foot, the third is the bathroom door is the highest point of the slope, water should be very little.
On the low side, passing the stone above the ground should not exceed 20 mm. This is similar to the above-mentioned principle. One is beautiful, the other is as little as possible at the foot, and the third is that the standard stone thickness is usually about 18 to 20.
Too high height difference, you can choose to thicken another custom stone. Pay attention to whether there are elderly or disabled people in the home.
Material application
The corners of the stone are usually chamfered, that is, a beveled edge is also used for beauty and convenience. Stones are recommended to use granite. Granite is harder than marble and resistant to treading. If one side of the ground (usually the outside of the bathroom) has a stone floor mosaic or stone floor circle line, can also be used similar or the same material, look better. The common inexpensive, solid and well-matched stones are Fengzhen black (Neimeng black), Jinan green, sesame ash and so on.
Constructive attention
In the installation, cement mortar is usually used to lay the passstone. In use, I found that after a certain period of time, the gate stone was trampled, sometimes with cracks in the surrounding cement mortar. Therefore, it is recommended that when laying cement mortar, the ground on the side of the toilet will be left as a gap, which is roughly controlled to be about 5 mm wide. After the interior is filled with cement mortar, the surface will be slightly concave, and the construction adhesive or silicone will be used afterwards. Glue (the material that the fixture is also used for) is lapped so that even if there is a crack in the cement mortar and the door stone is removed, when water is present, the water will not penetrate the gap. At the same time, construction adhesive or silicone adhesive can also be used to put a little bit of the interface between the wooden door cover and the floor of the bathroom floor tile to reduce the chance of moisture spreading along the floor to the door cover and causing discoloration and rot in the lower part of the door cover.
Buy Materials Cement Marble Room Floor Tiles Marble Tiles Bathroom Tiles Colors Bathroom Tiles Bathroom Doors Tiles Rubber Floor Tiles ld Tiles
Mirror Mould,Fender Mould,Motor Guard Mould,Automotive Exterior Parts Mold
Taizhou ANO MOULD CO.,LTD , https://www.ainomould.com