Processing technology and application of TPX materials

1. Comparison at high temperature: relatively high elongation at break, impact strength, superior creep resistance (high rigidity);

a, above 100 ° C exceeds PP;

b, one year can be used in 130 °C environment;

c, above 150 ° C over PC;

d, 100 hours can be used in 180 °C environment.

2, electrical insulation: (no polar groups in the TPX molecule)

a, dielectric strength: 65KV / mm (excellent than PTFE and propylene);

b, dielectric constant: 2.12 (PTFE dielectric constant is 2.0 to 2.1);

3, chemical resistance: acid, alkali, edible oil; (low water absorption: very high tolerance to water and water vapor)

4, health and safety: non-toxic, in line with the US FDA.

Second, TPX processing technology:

1. Injection molding process: material temperature: 260 ° C ~ 300 ° C; mold temperature: 70 ° C; it is recommended to select the screw length to diameter ratio of the injection molding machine: L / P = 20 or more.

2, blow molding

3, extrusion molding

advantage:

1. High tensile strength;

2, excellent resistance to toughness and impact resistance;

3, self-lubricating, good wear resistance, excellent chemical resistance;

4, good low temperature characteristics;

5, with self-extinguishing.

use:

1. Electronic appliances: connectors, bobbins, timers, cover circuit breakers, switch housings, sockets, connectors, etc.;

2, the car: cooling fan, door handle, fuel tank cover, air intake grille, water tank cover, lamp holder, oil filter, gasket, etc.;

3, industrial parts: seat, bicycle frame, skate base, textile shuttle, pedals, pulleys, power tools, etc.;

4. Others: building materials, hardware, fishing nets, fishing gear, spinning, packaging materials, woven bags, cable ties, etc.

Third, the application of TPX:

1. Beakers, petri dishes, incubators (transparency, chemical resistance, water vapor permeability);

2, cosmetic containers, bottle caps (fragrance) (there is no plastic smell, will not interfere with the original aroma);

3, microwave lunch box, food container (non-toxic, good temperature resistance, no absorption of microwave);

4. Electronic and electrical parts, LED strips, and covered cables (insulation, extrusion grade);

5, medical equipment: speculum tube, syringe (health);

6, film (extrusion grade);

7, oven appliances (high temperature).