In the home improvement paint is an important part of the art, that is to say, three-point carpentry seven points lacquer, so the brush paint must cause everyone's attention, the quality of the paint project depends not only on the construction process, and the quality of the paint product itself is also good or bad Great relationship. Next Xiaobian introduced the attention of painters.
Painter's Notes
1. The construction of paint must be performed within the room temperature required by the product. Different products have different temperature requirements. This can be found in the product packaging or in the manual.
2, each process to ensure that the dry side through the second pass.
3, use the same kind of paint, do not mix different types of paint to avoid adverse reactions.
4. During construction, safety measures should be taken, such as masks.
5. Keep indoor ventilation to prevent poisoning.
6. When using a certain corrosive paint such as Tinner, use a good glove.
7. Do not smoke or use an open fire at the construction site to prevent fire or explosion.
8, to avoid forced construction in high humidity or cold conditions.
9, ceiling or wooden partitions need to be covered with a gap treatment, can be used to deal with the atomized ash, then paste high-quality anti-crack tape; wall cracks can be scraped open cracks filled with plaster for processing, and then paste quality crack tape. Then paint the finish.
10. Adhere to the regular shop to buy paint, quality will be guaranteed.
Paint construction process
1, varnish construction process
Clean the surface of the woodware → Polished paper → Polished powder → Polished sandpaper → Full scrape the first time putty, sandpaper polishing → Full scraping the second time putty, fine sandpaper polishing → Brushing oil color → Brush the first time varnish →Fight for color, refill putty, fine sandpaper polish → brush the second time varnish, fine sandpaper → brush the third time varnish, polishing → sandpaper polishing fade, wax, polish.
2, mixed color paint construction process
First, clean the dust on the surface of the base layer, repair the base layer → level off with matte paper → paint on the frugal part → puttying on the bottom → dry oil → first pass paint scraper → polishing → brushing primer → primer Dry hard → brushing the surface layer → repair putty to repair → polish wipe the third time the paint brush brush the second time coating → polishing → third paint finish → polishing wax.
Editor's summary: About the painter's attention is introduced here, I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
Painting works
Ningbo RMI Plastic Co.,Ltd offer several models of CPVC Check Valve, include flange type swing check valve, socket type swing check valve,CPVC flange ball check valve, CPVC true union ball check valve, CPVC single union ball check valve, CPVC wafer check valve, CPVC Foot Valve socket end, CPVC bottom valve flange end. designed as per standard DIN, ANSI, JIS, BS, CNS. pressure rate by PN10. CPVC check valve is usually used in chemical industrial for acidic and alkaline medium delivery
Ningbo RMI Plastic Co.,Ltd offer CPVC check valve with specification:
Size:DN15~DN300 (1/2 inch ~ 12 inch)
Connection: Flange DIN PN10, ANSI CL150, JIS10K; socket DIN, ANSI, JIS, CNS, BS; Thread BSPT, NPT.
Body Material: CPVC
Seal material: EPDM;FPM
Design pressure:1.0Mpa(PN10 bar)
CPVC Check Valve,CPVC Swing Check Valve,CPVC Ball Check Valve,CPVC Wafer Check Valve
Ningbo RMI Plastic Co.,Ltd , https://www.rmiplast.com