Model NO.: HY625 HY630
Trademark: Hong Ye Silicone Rubber
Origin: China
HS Code: 39100000
Model NO.: HY625 HY630
Trademark: Hong Ye Silicone Rubber
Origin: China
HS Code: 39100000
1. Liquid RTV Silicone Rubber Raw Material For Cultured Stone application:
Mold making silicone can be used for production of different sizes of polyurethane moulds,gypsum moulds,plaster moulds, resin moulds,polyresin moulds,PU resin moulds,wax moulds,stone moulds ,epoxy moulds,acrylic moulds,polyester moulds making
A. Decorative items: cornices moulding ,columns moulding,ornaments moulding,statues molding.....
B. Casting of funiture and decoration crafts molding
C. Construction: prefabrication of decrative features molding,pavement molding,paving stone moulding,urban
furniture molding,concrete products molding
D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding
3. Liquid RTV Silicone Rubber Raw Material For Cultured Stone main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
2. Liquid RTV Silicone Rubber Raw Material For Cultured Stone of TDS:
|
Model |
630# |
|
Appearance |
white |
|
Mixing ratio (%) |
5% |
|
Operating time ( hours ) |
30~40 |
|
Curing time( hours ) |
3~4 |
|
Hardness (A°) |
30 |
|
Density ( g/cm 3) |
1.08 |
|
Viscosity (25 C°,mPa.s) |
22000~ 24000 |
|
Tensile-strength ( kgf/cm2 ) |
40 |
|
Tear-strength (kgf/cm ) |
25 |
|
Elongation-break(%) |
≥ 420 |
|
Retractility(%) |
≤0.25 |
3. Liquid RTV Silicone Rubber Raw Material For Cultured Stone main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
4. Liquid RTV Silicone Rubber Raw Material For Cultured Stone frequently asked question:
Why does the silicone rubber molds appeared striately and unsmoothly?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
To recommend suitable product for your application, we would be much appreciated to have your following information:
1. What is the material of your product?
2. What is the size of your product?
3. How do you make silicone mold, by pouring or brushing?
More information about Mould Making with Silicone RTV rubbers, pls contact Mr. Google Wan at any time
Â
Tel: +86-755-89212382
Â
Mobile: +86-18938867550
Â
1. Liquid RTV Silicone Rubber Raw Material For Cultured Stone application:
Mold making silicone can be used for production of different sizes of polyurethane moulds,gypsum moulds,plaster moulds, resin moulds,polyresin moulds,PU resin moulds,wax moulds,stone moulds ,epoxy moulds,acrylic moulds,polyester moulds making
A. Decorative items: cornices moulding ,columns moulding,ornaments moulding,statues molding.....
B. Casting of funiture and decoration crafts molding
C. Construction: prefabrication of decrative features molding,pavement molding,paving stone moulding,urban
furniture molding,concrete products molding
D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding
3. Liquid RTV Silicone Rubber Raw Material For Cultured Stone main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
2. Liquid RTV Silicone Rubber Raw Material For Cultured Stone of TDS:
|
Model |
630# |
|
Appearance |
white |
|
Mixing ratio (%) |
5% |
|
Operating time ( hours ) |
30~40 |
|
Curing time( hours ) |
3~4 |
|
Hardness (A°) |
30 |
|
Density ( g/cm 3) |
1.08 |
|
Viscosity (25 C°,mPa.s) |
22000~ 24000 |
|
Tensile-strength ( kgf/cm2 ) |
40 |
|
Tear-strength (kgf/cm ) |
25 |
|
Elongation-break(%) |
≥ 420 |
|
Retractility(%) |
≤0.25 |
3. Liquid RTV Silicone Rubber Raw Material For Cultured Stone main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
4. Liquid RTV Silicone Rubber Raw Material For Cultured Stone frequently asked question:
Why does the silicone rubber molds appeared striately and unsmoothly?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
To recommend suitable product for your application, we would be much appreciated to have your following information:
1. What is the material of your product?
2. What is the size of your product?
3. How do you make silicone mold, by pouring or brushing?
More information about Mould Making with Silicone RTV rubbers, pls contact Mr. Google Wan at any time
Â
Tel: +86-755-89212382
Â
Mobile: +86-18938867550
Â
Gate Valves,Sea Water Gate Valve,Stainless Steel Gate Valve,Steel Gate Valve
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztpipevalve.com