In the renovation project, every time we emphasize the three-point material, seven-point process, the same latex paint construction, attention to detail can make your wall brush more perfect. So, what are the precautions for the renovation of latex paint walls ? Let's take a look with Xiaobian.
Latex wall renovation considerations
Matters needing attention First, must be mixed before construction
Before the construction of latex paint must pay attention to mixing evenly, especially for colored emulsion paint, if not evenly stirred, when the color paste in the coating is not uniformly dispersed or due to long-term storage of color paste precipitation, then the construction will cause decoration The phenomenon of flowering on the surface affects the decorative effect.
Matters needing attention Second, choose the appropriate construction method
There are three main methods for the application of latex paint, brush, roller and spray; no matter which kind of brushing method, we must pay attention to the use of primer, both to protect the wall and can save money. Primer can make the substrate porosity uniformity, improve the coating rate of topcoat, saving topcoat. Primers are much cheaper than topcoats, which in turn will cost less. Secondly, brushing the paint again can help the top coat improve the fullness of the paint film, making people feel fuller in color and more texture.
Note three, pay attention to the dilution ratio
After the paint is bought back, it must be diluted. In order to obtain the ideal paint film, it is about 15%~20%. Please refer to the instruction manual for the specific situation.
Matters needing attention four, painting times and intervals
Some people will think that more and more times the coating, the paint will be unable to stretch down, but in fact the quality of the latex paint even if it is painted 10 times, 20 times will not fall down. The lacquer is usually caused by the loose moisture of the putty. In this case, even if the paint is applied twice, it will fall down. However, latex paints do not need to be painted so many times. Brush the primer through the wall and paint it twice. Dark paints need to be brushed several times.
As for the time between two separate intervals, it is actually the first time that the surface of the emulsion paint is dried. This is determined according to the seasonal and climatic temperatures at that time. However, according to the National Standard for Latex Paint, the interval time is two. Dry time is less than 2 hours, generally about 20-30 minutes in summer, and about 1 hour to 1.5 hours in winter, the time will not be very long.
The above notes on the renovation of latex paint walls are briefly introduced here. I hope the above information will help everyone. If there is anything we do not know where to leave comments on the bottom of the page, we will answer your questions as soon as possible. Thank you for your support of this site. Follow-up articles have been published. Please continue to pay attention.
Latex paint wall construction
Suzhou Newstar Hardware Co.,Ltd, is a professional China Manufacturer in various kinds of Tool Set, including Hand Tool Set, power tool set, electric screwdriver set, power tool kits and garden tool set. Located in Zhangjiagang, Jiangsu Province, we enjoy convenient traffic to Shanghai and Ningbo Port. With years experience in this industry, we have stable production capacity, and continue to innovate and develop, and adhere to the principle of good faith and quality.
Power Tool Set,Electric Screwdriver Set,Power Tool Kits,Cheap Power Tool Sets
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.hardwarenewstar.com