1 Remove the oil gauge (oil cover).
2 Place an oil bowl under the engine. Remove the oil from the oil tank and place it in the oil pan in the crankshaft tank. Put the oil drain screw on the crankshaft and fasten the oil.
3 Add new oil and measure it with an oil ruler so that the oil reaches the upper position of the oil gauge grid.
(2) Air filter maintenance operation The engine in the generator set has been used for a total of 50 hours or has been used continuously for three months, ie the air filter is to be cleaned.
1 Remove the air cleaner cover and filter element.
2 Clean the filter element with solvent and blow dry.
3 Fill the filter element and dry it with a damper so that the filter element is moist and not dripping properly.
4 Insert the filter into the air cleaner.
(3) Replacement of parts and components In the daily maintenance and regular maintenance of the generator set, if parts need to be replaced, it is better to use original parts and operate it by professionals so as not to affect the technical performance of the machine.
A power Tool is a tool that is actuated by a electric power source and mechanism.Power tools are used in industry, in construction, in the garden, for housework tasks and around the house for purposes of driving (fasteners), drilling, cutting, shaping, sanding, grinding, polishing, painting and more.The most common types of power tools included Electric Hand Drill,electric Impact Drill,hand Cutting Machine,electric wrench,angle grinder etc.
Power tools are classified as either stationary or portable, where portable means hand-held. Portable power tools have obvious advantages in mobility. Stationary power tools, however, often have advantages in speed and precision.
Electric Power Tool,Electric Angle Grinder,Cutting Machine,Impact Drill
Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com