Horizontal pump multistage centrifugal pump start preparation before there are many, such as multistage centrifugal pump lubricant name, model, the main performance and the number of filling whether the technical documentation requirements, multi-stage centrifugal pump, Bearing seat, the foundation of the motor bolts are loose and so on, the following Xiaobian to introduce horizontal multistage centrifugal pump before the start of what are the preparations? 1, before the start of multistage centrifugal pump inspection multi-stage centrifugal pump lubricant name, model, the main performance and the number of filling whether the technical documentation requirements; bearing lubrication system, sealing system and cooling system is intact, bearing oil, Whether the waterway is smooth; circling the pump rotor 1 ~ 2 turn, check the rotor for friction or stuck phenomenon; in the vicinity of the coupling or belt guard, etc., whether there are obstacles to rotation; multistage centrifugal pumps, bearings Block, the foundation of the motor foundation bolts are loose; multi-stage centrifugal pump working system valves or ancillary devices should be in the pump load minimum position, should close the exit control valve; start multistage centrifugal pump to see whether the impeller steering whether And design to the same direction, if inconsistent, it is necessary to completely stop the impeller rotation, adjust the motor wiring, before starting again. 2, horizontal multistage centrifugal pump water pump before starting, the pump housing and suction pipe must be filled with water, this is because of the presence of air, multistage centrifugal suction port vacuum can not be formed and maintained. 3, Horizontal Multistage Centrifugal Pumps Pumps for transporting high-temperature liquid, such as boiler feed pumps in power plants, must be warmed up before starting multistage centrifugal pumps. This is because when the feed water pump is started, the high-temperature feed water flows through the pump, causing the temperature of the pump body to rise quickly from room temperature to 100-200 ° C, which causes the temperature difference between the inside and outside of the pump and between the components. If there is not enough Heat transfer time and appropriate measures to control the temperature rise will cause uneven expansion of the pump around, resulting in deformation of the various parts of the pump, wear, vibration and axle suspension accidents. Above is the horizontal multi-stage centrifugal pump should be prepared before starting some of the work, with these preparations, I believe you follow the follow-up horizontal multistage centrifugal pump will be more smoothly. Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)
The quick stacking door has many functions such as heat preservation and cold preservation, insect and wind prevention, dust insulation and sound insulation. Widely used in underground parking lots, industrial plants, food, textiles, electronics, printing and packaging, automotive assembly, precision machinery, logistics and warehousing and other places.
Automatic Stacking Doors,High Speed Security Door,Rapid Stacking Folding Door,Automatic Stacking PVC Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfrollershutterdoor.com