 |
According to a report from the American Physicist Organization Network on November 8 (Beijing time), American scientists have used thin gallium arsenide to create a thin-film solar cell with a maximum conversion efficiency of 28.4% through new ideas that are contrary to traditional scientific research. The key to improving the efficiency of this solar cell is not to let it absorb more photons but let it release more photons. Solar cells made with gallium arsenide in the future are expected to exceed the limits of energy efficiency conversion records.
In the past, scientists have emphasized that solar cell efficiency is increased by increasing the amount of solar energy absorbed by photons. The electrons that the solar cell produces after absorbing sunlight must be extracted as electricity, and those that are not extracted quickly enough will decay and release their own energy.
A study led by Eli Yabulnovich, a scientist at the Lawrence Berkeley National Laboratory under the U.S. Department of Energy, showed that if these released energy were emitted as external fluorescence, the output voltage of solar cells would increase. Yabulonovich said: "Our research shows that the more efficient the solar cells are to release photons, the higher their energy conversion efficiency and the higher voltage they provide. External fluorescence is the theoretical maximum of solar cell conversion efficiency - Shockley. The key to the Quantel efficiency limit is about 33.5% for a single pn junction solar cell."
Owen Miller, the participating researcher, explained that in the open circuit environment of solar cells, electrons have nowhere to go and they will be densely packed. Ideally, they emit external fluorescence and precisely balance the incident sunlight. .
Based on this, Alta Equipment Co., co-founded by Albrunovich, used AlGaN's earlier-developed single-crystal thin-film technology, epitaxial lift-off technology, to produce thin-film solar cells with a maximum conversion efficiency of 28.4% using gallium arsenide. battery. This battery not only broke the previous conversion efficiency, its cost is lower than other solar cells. Currently, the most efficient commercial solar cell is made from a single-crystal silicon wafer with a maximum conversion efficiency of 23%. Although gallium arsenide is more expensive than silicon, it is more efficient in collecting photons. In terms of cost performance, gallium arsenide is an ideal material for manufacturing solar cells.
Yabulonovich said: "The high performance of solar cells is related to external fluorescence. Our theory will significantly change the face of future solar cells. We will live in a world where solar cells are very cheap and efficient."
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Flood Light,250W Led Flood Light,Led Flood Light 400 Watt,Led Flood Light Solar
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinlighting.com