Dehydration-type fertilizer is mainly caused by excessive application of chemical fertilizer at one time, or insufficient soil moisture. After fertilization, the concentration of fertilizer solution in the soil is too large, causing reverse osmosis of water in crop cells, resulting in dehydration of crops. The plants that are affected by the fertilizer show wilting, and they seem to be affected by frost or boiling water. Lightness affects growth and development, and the whole plant died. Prevention: Each application should not be too large, and it can be applied with water when it is dry.
The smog-type fertilizer is mainly applied with ammonia, ammonium bicarbonate and other fertilizers. Such fertilizers are applied at high temperatures, which are prone to produce a large amount of ammonia gas, causing damage to crops, and lighter yellowing of the lower tip, affecting growth and development. The heavy ones caused the whole plant to die. Prevention: This type of fertilizer should be avoided at high temperatures.
Burning type fertilizers When the amount of fertilizer applied is too large, or with fertilizers such as superphosphate, ammonium bicarbonate, urea, lime nitrogen, etc., there will often be burning, resulting in lack of seedlings. Prevention: The amount of fertilizer should not be too large, and no seed dressing such as superphosphate, ammonium bicarbonate, urea or lime nitrogen.
Toxic fertilizers Some fertilizers, such as lime nitrogen, are applied to the soil for a series of transformations to be absorbed by plants, but some toxic substances are produced during the conversion process to poison the crops, causing them to be killed or killed. Prevention: The application amount should be strictly controlled when applying fertilizer, and the fertilizer should be applied safely and rationally.
The smog-type fertilizer is mainly applied with ammonia, ammonium bicarbonate and other fertilizers. Such fertilizers are applied at high temperatures, which are prone to produce a large amount of ammonia gas, causing damage to crops, and lighter yellowing of the lower tip, affecting growth and development. The heavy ones caused the whole plant to die. Prevention: This type of fertilizer should be avoided at high temperatures.
Burning type fertilizers When the amount of fertilizer applied is too large, or with fertilizers such as superphosphate, ammonium bicarbonate, urea, lime nitrogen, etc., there will often be burning, resulting in lack of seedlings. Prevention: The amount of fertilizer should not be too large, and no seed dressing such as superphosphate, ammonium bicarbonate, urea or lime nitrogen.
Toxic fertilizers Some fertilizers, such as lime nitrogen, are applied to the soil for a series of transformations to be absorbed by plants, but some toxic substances are produced during the conversion process to poison the crops, causing them to be killed or killed. Prevention: The application amount should be strictly controlled when applying fertilizer, and the fertilizer should be applied safely and rationally.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】
The membrane pump consists of a pump chamber, inlet and outlet valves, and a flexible diaphragm made of various materials such as rubber, thermoplastic, or metal. When the diaphragm contracts, it creates a vacuum, causing the inlet valve to open and draw the fluid or gas into the pump chamber. Subsequently, as the diaphragm expands, the inlet valve closes, and the outlet valve opens, pushing the fluid or gas out of the chamber.
DC Membrane pump,DC 12V membrane pump,Membrane Water Pump,Membrane Vacuum Pump,Membrane Air Pump
Shenzhen DYX Technology Co.,Limited , https://www.dyxpump.com