Decoration refused dust hazard

Now that some of the new houses’ walls and walls are not in place due to the painting, it is very easy to cause emptying, cracking and dusting. This is the source of dust pollution. For example, if there is sand running phenomenon on the concrete floor and the ground is loose, it is difficult to sweep clean and there will be a lot of floating dust. This not only pollutes the environment, but at the same time the dust particles on the cement floor will adhere to the work surface during the subsequent construction process, thereby reducing the scraping and painting quality.

In response to this, some home improvement companies have launched "adding a solid" program. Ground solidification is the surface curing agent, which is used for curing the cement floor in the early stage of decoration. Ground solid can infiltrate the concrete floor, and loose ground particles, which facilitates the close combination of decorative materials and the ground. It effectively prevents empty drums in the floor tiles and facilitates floor cleaning.

It is understood that some home improvement companies "plus ground" is a must-have program, and some companies choose project projects. The price of a barrel of floor curing agent is about 100 yuan -200 yuan, and it can be painted about 100 square meters. Consumers can choose according to home improvement company quotes.

Wet wood chips to help clean water spray humidification is a good way to clean dust during the renovation process. It should be noted that not all aspects are suitable for water jet cleaning. For example, in the woodworking process, the moisture should not be too much, and it cannot be directly sprayed on the wood. Otherwise, it will cause the wood to be wetted or even deformed; in the putty grinding process, the excessively wet indoor environment is not conducive to the drying of the wall, and it is not conducive to Dust quickly dry out.

Before you move into a new home, ventilating the room is a must-have program for removing dust. In addition to cleaning the dust with a vacuum cleaner, wet cloth, you can wait until the dust is completely on the ground, and then spread some wet wood to the floor to clean it. As the sawdust has an adsorption effect, the sprinkled water will not be dusty, so that the dust will be cleared away.

In daily life, dust accumulation is most common in the bedroom and bedroom (bedroom decoration renderings) under the bed, windowsill, table, chandeliers and other space and location. In the design of space, it should be avoided as far as possible the location of dead ends, home ceiling (building ceiling renderings) is not designed to be too complex, try to choose the height of the chandelier stretching, usually cleaning will be more convenient.

This edition has written /*** reporter Feng Jing putty sanding the site to wear masks usually in the wall part of the family decoration, decoration workers first plaster leveling, and then scraping putty powder. In order to partially smooth the wall, after the putty powder is completely dried, it needs to be hand-polished with fine sandpaper.

In this process, there will be a large amount of material shedding, that is, dust we see. Grinding putty is also the most likely to cause dust pollution in the decoration process. These dust will enter the body through the respiratory tract, long-term inhalation will harm the body.

Protective measures: During this period, regardless of the worker or the user, necessary protective measures must be taken. For example, dust isolation masks and other tools. However, these small dusts are often attached to places that are not well-tended, such as doors and windows (window and window decoration effect) seams, etc., and can be handled by vacuum cleaners.

Tip: During the actual construction period, putty powder does not need to be polished for a long period of time. It is understood that a room of about 60 square meters, polishing putty takes about a day, but scraping again putty need to polish it again. Local decoration users can understand the progress and duration of the project in advance, protect the furniture that needs protection, use protective masks, minimize the time spent indoors, and avoid the impact of dust pollution.

Woodworking dust The use of dustless cutters The dust generated by woodworking is basically derived from the drilling of building walls, the cutting of household ceiling gypsum boards, and the cutting of woodworking panels. Relatively speaking, the board cuts more dust. Because the plates used for home decoration are basically integrated boards, the raw materials of these boards are crushed by the machine and then overmolded with plastic. Therefore, powders tend to appear during the cutting process.

In addition, dust is easily generated during the laying of the floor. It is difficult to completely clean the small powder that is flying in the floor paving process. The residual powder may also cause hidden dangers to the health of consumers.

Protective measures: Some companies in the industry have now used dustless cutters to prevent the generation of dust through precise cutting. The built-in dust extraction technology in the cutter can also absorb a very small amount of dust generated to prevent the escape of dust and eliminate the dust to the utmost. When consumers purchase floors, the quality of floor coverings should also be considered.

Tip: For the substrate wood chips produced by the woodworking master during the cutting process, wear protective glasses, special masks, and open the windows for ventilation. Carpentry cutting is generally not allowed to be done outdoors. Consumers who are particularly concerned about dust pollution during the renovation process can purchase custom furniture products and install them directly in the room.

Bricklayer Dust Minimizes Contaminated Area Bricklayer dust comes from sand cement, wall tiles and floor tiles. It is understood that the basic materials of wall tiles and floor tiles are clay and rock, which are formed by pressing, crushing, firing, grinding or glazing. In the actual placement process, if the dimensions are not the same, it is necessary to cut on the spot, and it is unavoidable that a large amount of dust is generated in the cross section. In the process of installing cabinets with marble countertops and paving wall tiles, the brick dust pollution is the most serious.

Protective measures: The only solution to this problem is for the designer to design the layout and install it directly on the site after the factory has completely cut it. This will avoid secondary pollution at the construction site. Second, in the construction process, as far as possible the cutting project is arranged in a room, diligent in opening windows for ventilation, to minimize the pollution area.

Tip: During the renovation process, fine dust can easily bring bacteria into the body. The decoration should be promptly cleaned and wet cleaned. In the air-conditioned room, the air-conditioner filter should be often scrubbed to avoid contamination of the bacteria.